Asset Details Page -Individual Assets Activity Log

Individual Asset Details Page - Activity Log

On the left navigation bar, click "Assets." Locate the asset you would like to view and click on it.

The Assets detail page will open. Click on the "Activities" box to view the activity logs for this asset. The activity box explains the status of the installed devices and has a heart icon.

The following is a status key:

Heartbeat	The primary device, the hub, reports a heartbeat every 30 minutes. Communicating it is online and functioning.
Lock Jammed	The deadbolt is not extending or retracting the whole way.
Cellular Signal Strength	What kind of signal strength the hub's receiving (Excellent, Good, Low, No Signal)
Config	When a software update was communicated to the device.
Lock Code Setting/Set	A code is trying to set or has been set.
Z-Wave Signal	Type of connection and strength the device has to the hub.
Remove Device	A device was removed from the system.
Add Device	A device was added to the system.
Room Temp	Room (Temp, humidity, set point).
Battery	Low battery, Change the battery, percentage status.
Lock manually	The deadbolt was locked by hand.
Failed to unlock passcode not set on lock	The code was not set to the lock.
Auto-Lock is Successful	The auto lock was successful.
Unlocked via IC card	A fob unlocked the lock.
Unlocked via passcode	A set code unlocked the lock.

If you need any additional assistance, please contact Rently support at 888-340-6340.