HomeSeer Leak Sensor Guide

HomeSeer Leak Sensor Installation/Troubleshooting Guide

About the product:

• Designed to be free-standing or wall mounted.
• Includes optional magnetic wall mount
• Supports S2 Security
• Compatible with most Z-Wave certified controllers. It will not work with hubs that do not support this command: including Wink.
• Operation: Triggers activity when water leaks are detected, uses notifications or sound alarms.
• The probe cable can be used to detect water levels when installed into a container, example is a full dehumidifier. 
• Dimensions: 2.5" x 2.5" x 1".

Installation:

• For in depth instructions on how to install the leak sensor please see the link: https://homeseer.com/wp-content/uploads/2020/09/HS-LS100-rev2.pdf

For any further information please refer to the instruction manual:

https://homeseer.com/wp-content/uploads/2020/09/HS-LS100-rev2.pdf 

If you need any additional assistance, please contact Rently support at 888-340-6340.