Add a Property

Remember: Search First, Add Second!

Searching for a property before adding a new property will help avoid adding duplicate listings. This is good practice just in case another coworker signed in to Rently earlier and added the same property. If nothing shows up in the search, it’s time to go ahead and add a listing!

Adding Your New Listing:

Step 1:

Use the blue Add New Property button to add a property to your Rently portal. It can be found on your Properties page.

You will then be asked if you want to manually add property details or import from your property management software. 

 * Property management softwares Rently pulls data from: Appfolio, Propertyware, Buildium, RentCafe, FreeRentalSite

Step 2: 

Manual: Manually add property details, description, and photos.

Import: Add properties by pulling data from your management software website/feed.

Step 3: (If Doing Manual)

Fill in the details about the property, add aplication link, and photos. (Fields with an asterisk are required)

Step 3: (If using Import)

Select a property from the Data Import page and press the "Import Property Data" button.

Step 4: 

Decide if you want to put your property on market or not. Then select the serial number of the device you want to assign to the property. You will also need to add Access Instructions and what type of showings you want to allow (agent showing, self showing, or none/waitlist).