To add to include or remove to exclude the thermostat from Z-Wave network, go to thermostat MENU/Z-WAVE SETUP.
Bring the hub to the thermostat (The Rently hub has a battery backup, so no need to plug in for this process.)
- Touch Select on the thermostat. You will be asked to set your primary
controller to INCLUDE MODE. Press the black (+) button on the hub and look for the flashing green light
- Touch Select on the thermostat.
- If the inclusion procedure is successful,
"INCLUDED", the node ID, and the Z-Wave
connected status icon appear on the screen.
- If the procedure fails, “FAILED TO INCLUDE”
appears on the screen. If this happens, retry the above process.